Headlight Lens Restorer KIT Ceramic (53684 Turtle wax

Enhetskode: AL40205359

Headlight Lens Restorer KIT Ceramic (53684 Turtle wax

Vi leverer til
United States

Vi kan levere dette produktet til United States og andre land. Du kan se leveringskostnaden i handlekurven.

Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
151.59 nok
Pris: 151.59 nok
- Kan bestilles
- 9 stk.
leveringsdato:
29.04.2024, 13:55
Legg til i handlekurven

Beskrivelse:: INCREASE THE TRANSPARENCY OF HEADLIGHTS FOR SAFER DRIVING! • Designed to remove both light and strong oxidation and yellowness to improve headlight performance. • Saves money - no need to spend on new headlights. • Excellent results without power tools. INSTRUCTIONS: Wash the surface of the headlight cover completely and dry it. Note: Do not use the product on a hot surface or in direct sunlight. Suitable air temperature is 13-29 ° C, maximum humidity 80%. Recommendation: Protect the surrounding painted surfaces with masking tape. USE: 1). Gently shake the Headlight Lens Repair & Renew. Pour the product on a cotton cloth. Rub the surface with even back and forth movements for approx. 30 s, medium pressure. Polish over with a soft, clean cotton cloth. If the surface is not clean enough, continue sanding. 2). Sanding: Dampen the surface of the headlight cover and the sanding pad with water. Sand the dull areas with the green side of the pad (# 1) for approx. 30 s. Keep the surface and pillow wet. Then rub the dull spots on the other side of the pillow (# 2). Wipe the surface with a dry cotton cloth. 3). Reapply Headlight Lens Repair & Renew Compound. Rub the surface again with even back and forth movements for approx. 30 s, apply stronger pressure to the sanded areas. Wipe the surface dry. If necessary, repeat the entire procedure. Replace the second headlight cover in the same way. 4). Put on the glove in the package and open one package of Ceramic Acrylic Wipe. Sweep over both covers with quick back and forth movements. The surface is touch dry after approx. 3-5 minutes. The coating dries completely in 24 hours. NOTE: For even better transparency and shine, re-polish the coatings after the ceramic acrylic coating has completely dried with Headlight Lens Repair & Renew. The second cloth can be used to restore the headlights of the next car or to provide additional protection for the headlights of an already restored car. Apply the second protective layer after the first one has dried completely, ie after 24 hours.