Polish wax til Alfa Romeo GIULIETTA (101_) 01.1954 - 12.1962

Resultater funnet: 8
  • Vi leverer til
    United States
    Vi leverer til United States og andre land.

    Gratis levering på ordrer over 208 eur, samt mindre produkter under 10 kg

    Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

    Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
  • 149.31 nok
    • i butikken
    • 3 stk.
  • leveringsdato:
    26.09.2022, 05:19
  • Legg til i handlekurven
LES MER
INCREASE THE TRANSPARENCY OF HEADLIGHTS FOR SAFER DRIVING! • Designed to remove both light and strong oxidation and yellowness to improve headlight performance. • Saves money - no need to spend on new headlights. • Excellent results without power tools. INSTRUCTIONS: Wash the surface of the headlight cover completely and dry it. Note: Do not use the product on a hot surface or in direct sunlight. Suitable air temperature is 13-29 ° C, maximum humidity 80%. Recommendation: Protect the surrounding painted surfaces with masking tape. USE: 1). Gently shake the Headlight Lens Repair & Renew. Pour the product on a cotton cloth. Rub the surface with even back and forth movements for approx. 30 s, medium pressure. Polish over with a soft, clean cotton cloth. If the surface is not clean enough, continue sanding. 2). Sanding: Dampen the surface of the headlight cover and the sanding pad with water. Sand the dull areas with the green side of the pad (# 1) for approx. 30 s. Keep the surface and pillow wet. Then rub the dull spots on the other side of the pillow (# 2). Wipe the surface with a dry cotton cloth. 3). Reapply Headlight Lens Repair & Renew Compound. Rub the surface again with even back and forth movements for approx. 30 s, apply stronger pressure to the sanded areas. Wipe the surface dry. If necessary, repeat the entire procedure. Replace the second headlight cover in the same way. 4). Put on the glove in the package and open one package of Ceramic Acrylic Wipe. Sweep over both covers with quick back and forth movements. The surface is touch dry after approx. 3-5 minutes. The coating dries completely in 24 hours. NOTE: For even better transparency and shine, re-polish the coatings after the ceramic acrylic coating has completely dried with Headlight Lens Repair & Renew. The second cloth can be used to restore the headlights of the next car or to provide additional protection for the headlights of an already restored car. Apply the second protective layer after the first one has dried completely, ie after 24 hours.
  • Gratis levering til
    United States
    Vi leverer til United States og andre land.
    Dette produktet leveres gratis!

    Gratis levering på ordrer over 208 eur, samt mindre produkter under 10 kg

    Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

    Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
  • 254.30 nok
    • i butikken
    • 2 stk.
  • leveringsdato:
    26.09.2022, 05:19
  • Legg til i handlekurven
LES MER
The product increases the gloss, protection and depth of color of black vehicles. Contains special polymers that add lubricity to the surface and facilitate application and removal. Contains black color pigment and carnauba palm wax that fills in small scratches so that the surface remains deep black and particularly shiny. SiO2 acrylic polymers form a water and chemical repellent resistant surface that prevents water stains. USE. Wash the car completely and dry it. SHAKE the bottle well. Do not treat hot surfaces. Spray sparingly on the surface. Two sprays are enough for one panel. Spread the product evenly on the surface with a clean, folded microfibre cloth. For best results, allow to dry until the surface becomes cloudy. Then wipe off the residue with a new clean microfiber cloth. Fold the new clean side of the cloth as needed. Note. Can be used on rims and external plastic surfaces. Do not use on the roofs of convertibles. After using the product, wait 24 hours before washing the car or applying an extra layer of wax or topcoat to the body. TIP: For best results, pre-clean the car body with HS Black Polish. Can be used with other HYBRID SOLUTIONS products. Warning. Causes serious eye irritation. Keep out of the reach of children. Wash hands thoroughly after handling. Wear safety goggles / protective mask. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Rinse again. If eye irritation persists: Get medical advice / attention. Contains BENZISOTHIAZOLINONE. May produce an allergic reaction.
  • Gratis levering til
    United States
    Vi leverer til United States og andre land.
    Dette produktet leveres gratis!

    Gratis levering på ordrer over 208 eur, samt mindre produkter under 10 kg

    Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

    Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
  • 254.30 nok
    • i butikken
    • 1 stk.
  • leveringsdato:
    26.09.2022, 05:19
  • Legg til i handlekurven
LES MER
The product increases the gloss, protection and depth of color of black vehicles. Contains special polymers that add lubricity to the surface and facilitate application and removal. Contains black color pigment and carnauba palm wax that fills in small scratches so that the surface remains deep black and particularly shiny. SiO2 acrylic polymers form a water and chemical repellent resistant surface that prevents water stains. USE. Wash the car completely and dry it. SHAKE the bottle well. Do not treat hot surfaces. Spray sparingly on the surface. Two sprays are enough for one panel. Spread the product evenly on the surface with a clean, folded microfibre cloth. For best results, allow to dry until the surface becomes cloudy. Then wipe off the residue with a new clean microfiber cloth. Fold the new clean side of the cloth as needed. Note. Can be used on rims and external plastic surfaces. Do not use on the roofs of convertibles. After using the product, wait 24 hours before washing the car or applying an extra layer of wax or topcoat to the body. TIP: For best results, pre-clean the car body with HS Black Polish. Can be used with other HYBRID SOLUTIONS products. Warning. Causes serious eye irritation. Keep out of the reach of children. Wash hands thoroughly after handling. Wear safety goggles / protective mask. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Rinse again. If eye irritation persists: Get medical advice / attention. Contains BENZISOTHIAZOLINONE. May produce an allergic reaction.
  • Vi leverer til
    United States
    Vi leverer til United States og andre land.

    Gratis levering på ordrer over 208 eur, samt mindre produkter under 10 kg

    Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

    Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
  • 191.98 nok
    • Kan bestilles
    • 5 stk.
  • leveringsdato:
    27.09.2022, 13:55
    Hvis du bestiller nå, kan produktene leveres fra varelageret til ALVADI-butikken den 27.09.2022 12:00.

    Butikkadresse: Tallinn, Majaka 10

    Kunder i Tallinn mottar bestillingen samme dag.

    Resten av Estland mottar bestillingen samme dag eller dagen etter (avhenging av hvilken leveringsmetode som velges i kassen).
  • Legg til i handlekurven
LES MER
A means of removing aureoles, scratches and oxidation from the paintwork. Synthetic wax polymers give an exemplary shine and gloss. Durable protection with SiO2 infusion. Water and dirt repellent coating. USE. Wash and dry the car. SHAKE THE BOTTLE THOROUGHLY. Do not treat hot surfaces. Don't use too much - 60 ml is the right amount for one car. Manual application. Apply 3 small drops of foam to the foam sponge and spread 60x60cm on the surface. Use light to medium pressure and overlapping circular motions. Wipe off any excess with a microfiber cloth, wipe the last side with a clean cloth. Next, use a damp microfiber cloth to activate the gloss polymers. If necessary, wipe the surface again with a dry microfiber cloth. Machine application. To treat a 60x60cm surface, apply 4 small drops evenly to a medium-strength polishing pad. Apply the product to the surface with a slow turn. Switch the machine to high speed. Use light to medium pressure to work the surface back and forth. Remove excess with a microfiber cloth. Next, use a damp microfiber cloth to activate the gloss polymers. If necessary, wipe the surface again with a dry microfiber cloth. NOTE. Check the suitability of the product in a small hidden area. Do not use on rubber and vinyl surfaces or matte finishes. Allow the surface to dry for 24 hours before washing or recoating. Warning. Causes skin irritation. Causes serious eye irritation. Keep out of the reach of children. Wear protective gloves. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Rinse again. In case of skin irritation: Get medical advice / attention. If eye irritation persists: Get medical advice / attention.
  • Vi leverer til
    United States
    Vi leverer til United States og andre land.

    Gratis levering på ordrer over 208 eur, samt mindre produkter under 10 kg

    Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

    Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
  • 192.19 nok
    • Kan bestilles
    • 5 stk.
  • leveringsdato:
    27.09.2022, 13:55
    Hvis du bestiller nå, kan produktene leveres fra varelageret til ALVADI-butikken den 27.09.2022 12:00.

    Butikkadresse: Tallinn, Majaka 10

    Kunder i Tallinn mottar bestillingen samme dag.

    Resten av Estland mottar bestillingen samme dag eller dagen etter (avhenging av hvilken leveringsmetode som velges i kassen).
  • Legg til i handlekurven
LES MER
Synthetic waxes give an exemplary shine and shine. Durable protection with SiO2 infusion. Water and dirt repellent coating. USE. Wash and rinse the car. SHAKE THE BOTTLE THOROUGHLY. Spray 2 sprays on each panel of a wet car. Dry with a clean microfiber cloth. NOTE. You can add shine and protection with Hybrid Solutions 3-in-1 Detailer and Ceramic Wash & Wax. Keep out of the reach of children.
  • Vi leverer til
    United States
    Vi leverer til United States og andre land.

    Gratis levering på ordrer over 208 eur, samt mindre produkter under 10 kg

    Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

    Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
  • 204.67 nok
    • Kan bestilles
    • 5 stk.
  • leveringsdato:
    27.09.2022, 13:55
    Hvis du bestiller nå, kan produktene leveres fra varelageret til ALVADI-butikken den 27.09.2022 12:00.

    Butikkadresse: Tallinn, Majaka 10

    Kunder i Tallinn mottar bestillingen samme dag.

    Resten av Estland mottar bestillingen samme dag eller dagen etter (avhenging av hvilken leveringsmetode som velges i kassen).
  • Legg til i handlekurven
LES MER
An excellent protective cover keeps vehicle surfaces clean for longer. Spray on a clean, dry car to add shine and protection. Easy to apply and wipe even in direct sunlight. Surprising result on paint, metal, plastic and glass surfaces. Synthetic wax polymers make the paint color brighter, add depth and shine. USE. Wash and dry the car. SHAKE THE BOTTLE THOROUGHLY. Use sparingly. 2 sprays per panel is sufficient. Wipe the surface with a clean microfiber cloth. Remove the residue with a new clean cloth. For best results, the paint coating must be oxidation-free and completely clean. Use cleaning clay or polish the surface if necessary. Cover the surface with another layer for 12 months of protection. Use a damp microfiber cloth to even out the layer and remove ridges and streaks. Note. Do not cover the roof of the convertible with the product. Suitable for rims and exterior glass surfaces. The coated surface can be coated with other coatings or used as a top coat for existing coatings. Allow the coating to dry for 24 hours before washing the vehicle or coating it with a new protective layer. Keep out of the reach of children.
  • Gratis levering til
    United States
    Vi leverer til United States og andre land.
    Dette produktet leveres gratis!

    Gratis levering på ordrer over 208 eur, samt mindre produkter under 10 kg

    Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

    Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
  • 324.30 nok
    • Kan bestilles
    • 5 stk.
  • leveringsdato:
    27.09.2022, 13:55
    Hvis du bestiller nå, kan produktene leveres fra varelageret til ALVADI-butikken den 27.09.2022 12:00.

    Butikkadresse: Tallinn, Majaka 10

    Kunder i Tallinn mottar bestillingen samme dag.

    Resten av Estland mottar bestillingen samme dag eller dagen etter (avhenging av hvilken leveringsmetode som velges i kassen).
  • Legg til i handlekurven
LES MER
Versatile graphene-enriched wax that creates a tight protective net on the surface. A special process is used in the production of the device, which produces a stable liquid dispersion of graphene atoms. The result is surprising color depth, gloss level, chemical resistance, water repellency, UV protection and ultimate slipperiness. All this ensures a cleaner and better protected finish. USE. Shake the package well. The surface to be treated must be completely clean. Wash the car and rinse thoroughly. Remove surface oxidation and paint damage if necessary. Use a cleaning paste or clay and / or polish. Basic processing. Make sure the surface is completely dry. Spray 2 sprays on one panel. Wipe the surface with a clean, clean microfiber cloth. If necessary, fold the clean side of the cloth. Remove the residue with another clean microfiber cloth. Use a clean, damp microfiber cloth to remove any ridges. Let the product work for 24 hours before the next car wash. If necessary, repeat the entire procedure. The durability of the coating depends on the thoroughness of the surface preparation, the weather and the aftercare of the surface. Maintenance treatment. Wash the car. Spray 2 sprays per panel on a wet surface. Dry with a microfibre cloth OR using a pressure washer, rinsing the surface from the roof. Finish the surface with a microfiber cloth. Use a damp cloth to remove streaks or product residue. Note. Can be used on wheels, external glass surfaces, rubber and plastic surfaces. The product can be applied on previous professional coatings or wax coatings. NOT SUITABLE for roofing convertibles. Do not use on surfaces that must not be slippery (steps and steps). The device does not make the microfiber cloths rigid. Keep out of the reach of children. Contains BENZISOTHIAZOLINONE. May produce an allergic reaction.
  • Gratis levering til
    United States
    Vi leverer til United States og andre land.
    Dette produktet leveres gratis!

    Gratis levering på ordrer over 208 eur, samt mindre produkter under 10 kg

    Vi har forskjellige leveringsalternativer til United States. Du kan se leveringsdatoen og kostnaden i handlekurven din.

    Du kan spore pakken med den respektive sporingskoblingen som du mottar umiddelbart etter å ha betalt for ordren din.
  • 324.30 nok
    • Kan bestilles
    • 5 stk.
  • leveringsdato:
    27.09.2022, 13:55
    Hvis du bestiller nå, kan produktene leveres fra varelageret til ALVADI-butikken den 27.09.2022 12:00.

    Butikkadresse: Tallinn, Majaka 10

    Kunder i Tallinn mottar bestillingen samme dag.

    Resten av Estland mottar bestillingen samme dag eller dagen etter (avhenging av hvilken leveringsmetode som velges i kassen).
  • Legg til i handlekurven
LES MER
Quick perfect finish. The uniquely formulated tool allows you to safely repair and refine your paint surface with just one product. Contains high quality abrasives. The result depends on the hardness of the polishing pad used. Due to the unique composition of the product, you will see changes throughout the polishing of the paintwork. Silicone-free, suitable for painting workshops. USE (machine application). SHAKE the bottle well. Do not use on hot surfaces or in direct sunlight. Use a wool or hard foam pad to remove up to 1500-1000 grit sanding marks. Use a medium-hard or soft pillow for the final finish. Add 3-4 small drops to the polishing pad. At low speed, distribute the tool evenly back and forth in a 60x60 cm section. Apply light to moderate pressure. Then use the speed and pad appropriate for the type of polisher. Remove product residue from the surface with a microfiber cloth. Paint protection. Next, protect the paint coating with HYBRID SOLUTIONS PRO TO THE MAX WAX and HYBRID SOLUTIONS PRO FLEX WAX. Note. Check the suitability of the product in a small area. The product can also be used manually. Keep out of the reach of children. Contains BENZISOTHIAZOLINONE. May produce an allergic reaction.
Alle deler for Alfa Romeo GIULIETTA (101_)
Denne delen () eksisterer ikke i vår database eller har et annet navn.
Vis alle reservedeler
Alle deler for Alfa Romeo GIULIETTA (101_)
Denne delen () eksisterer ikke i vår database eller har et annet navn.
Vis alle reservedeler